Pelatihan Gas Compression & Flow Metering

Training Description

Pelatihan Gas Compression & Flow Metering. Gas production operations often require compressors to raise the pressure of the gas. This is accompanied by change of state of the gas which means change in temperature and volume of a quantum of gas going under compression . The most important ofcompressors such as providing enough pressure to a gas transport through transmission and distribution systems, reinjection of gas for pressure maintenance, circulation of gas through the process or system, raising gas pressure to the required level for a chemical processing reaction,etc. The compression calculations in the natural gas industry must be accurate and its of paramount importance for the gas industry. If an error occurs even though only 1.0 percent in the measurement of natural gas in the pipeline, this will give a loss either the seller or the purchaser amount of million a year, and certainly this is a bad thing and can be detrimental to the oil & gas company. Not only compression calculation but also the accuration of flow metering is
importance. The Flow is one of the most difficult variable to measure, because it cannot be measured directly like pressure and temperature. It must be inferred by indirect means, such as pressure differential over a specified distance, speed of rotation of a rotating element, displacement rate in a measurement chamber, etc.

Outline Pelatihan Gas Compression & Flow Metering

Inlet gas compression prior to treating.
Outlet gas compression prior to export pipeline.
Compression for gas lift, gas gathering, condensate recovery, transmission & distribution, gas re-injection & pressure maintenance.
Type of Compressor

Positive-displacement or intermittent flow and continuous flow units.

Reciprocating compressors.
Rotary positive-displacement and centrifugal compressors.
Axial and mixed-flow compressors.
Comparison between compressors and compressor selection.
Basics and Performance of Gas Compression

Isothermal, isentropic and polytropic ideal compression processes.
Real gas behavior and compression ratio.
Design and determination of the number of stages.
Inlet flow rate and compression power calculation.
Compressor control and performance maps.
Nomograph for estimating compressor performance.
Estimation of HP required for compressing natural gas.
Performance testing guidelines for centrifugal compressors.
Practical Guide to Accurate Flow Measurement.

Requisites of flow measurement and reference standards .
Custody and non-custody transfer.
Flow installation requirements and operational considerations.
Maintenance meter equipment, readouts and related devices.
Proving systems and auditing.
Accuracy, rangability and turndown.
Head type and mechanical type.
Electronic flowmeter and mass flowmeter.
Practical Aspects of Flow Metering.

Orifice plate, venturi, flow nozzle and Pitot tube.
Variables area meters.
Mechanical flowmeters.
Turbin and rotary flowmeters.
Electronic and vortex flowmeters.
Ultrasonic flowmeters.
Mass flowmeters.
Coriolis flowmeters.
Thermal mass flowmeters.

Jadwal Pelatihan 2025

Batch	Tanggal	Tanggal	Tanggal
Batch 1	2 – 3 Januari	16 – 17 Januari	30 -31 Januari
Batch 2	1 – 2 Februari	15 – 16 Februari	28 - 29 Februari
Batch 3	5 – 6 Maret	14 – 15 Maret	27 - 28 Maret
Batch 4	3 – 4 April	18 – 19 April	29 - 30 April
Batch 5	2 – 3 Mei	15 – 16 Mei	29 – 30 Mei
Batch 6	4 – 5 Juni	13 – 14 Juni	26 – 27 Juni
Batch 7	3 – 4 Juli	17 – 18 Juli	30 – 31 Juli
Batch 8	1 – 2 Agustus	14 – 15 Agustus	28 – 29 Agustus
Batch 9	4 – 5 September	17 – 18 September	26 – 27 September
Batch 10	2 – 3 Oktober	16 – 17 Oktober	28 – 30 Oktober
Batch 11	5 – 6 November	14 – 15 November	27 – 28 November
Batch 12	3 – 4 Desember	11 – 12 Desember	19 – 20 Desember

Jadwal dapat disesuaikan dengan kebutuhan calon peserta.
Silakan hubungi tim marketing kami untuk info lebih lanjut.

Lokasi dan Investasi

Pelaksanaan pelatihan oleh SITI Training dapat dilakukan secara fleksibel, baik offline maupun online, sesuai dengan kebutuhan dan preferensi peserta. Untuk pelatihan offline, kami menyediakan lokasi di berbagai kota besar di Indonesia:

Jakarta

5.500.000 IDR / peserta *

Yogyakarta

5.500.000 IDR / peserta *

Bali

5.500.000 IDR / peserta *

Bandung

5.500.000 IDR / peserta *

* Syarat dan ketentuan berlaku:
Investasi untuk pelatihan disesuaikan dengan jumlah peserta.
Silakan hubungi tim marketing kami untuk info lebih lanjut.

Training Online dan In-House

Bagi peserta yang lebih memilih pelatihan secara online, kami memfasilitasinya melalui aplikasi Zoom, memastikan pengalaman belajar yang interaktif dan efektif. Selain itu, kami juga melayani in-house training, di mana pelatihan dapat diselenggarakan langsung di lokasi perusahaan Anda, memberikan kenyamanan dan kemudahan bagi karyawan untuk meningkatkan keterampilan dan kompetensi mereka tanpa harus meninggalkan tempat kerja.

Catatan : Apabila perusahaan membutuhkan paket in-house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.