Training Advance Rigging And Lifting

Training Description

Training Advance Rigging And Lifting. Lifting Supervisor is in charge of the initial work of erecting the load and to ensure that all rigging work is carried out in a safe and efficient manner, adhering to the regulation and to sound established customs and practices.

The first consideration must at all times, be directed toward the safeguarding life and limb. This consideration must extend to all persons in vicinity or likely to enter the vicinity.

TRAINING OBJECTIVE

At the end of course, the participant should be able to:

Observe general safety first rules and carry out his duties in a safe and responsible manner.
Have knowledge of safe working load of the crane he is working with.
Have a full knowledge of hand signal (Australian/ New Zealand Standard)
Understand the correct type of sling, hook shackle etc. for load.
Have knowledge of the use of lifting beams, slings and chains.
Understand the effect of doubling crane hoist rope on safe working.
Understand use of rope, chain and shackle.
Understand not to use damaged wire rope or fiber rope, slings or chain where the links are not free or kinked wire rope.
Understand when slinging a load, pack between sling and load at all point where load has sharp corners, so as to prevent damage to sling.
Design and apply the knowledge of lifting and lifting plan in their daily work

OUTLINE Training Advance Rigging And Lifting

Introduction:

Definition of Dogger, Slinging & Crane Operator
Roles & Responsibilities of Rigger:
Rigger Certification System
Roles & responsibility of Crane Operator
Roles & Responsibility of Dogger
Roles & Responsibility of Slinger
Roles & Responsibility of Traffic Controller / Flagman
Roles & Responsibility of Lifting Supervisor
Accident & Prevention
Legislative Requirement:
International Standard: AS/NZS
Roles and Responsibilities: Crane operator, Crane Owner/End User, Facility/Site Owner, Lift Coordination, Lift Engineer/ Rigging Specialist, Workers and Crane Mechanic
Hazard And General Safety:
Outriggers and Crane Stability
Comparative Soil Bearing Capacities
Crane Selection Guide
Electrical Hazard
Public Road / Pedestrian Hazards
Utilities Overhead and underground
Accidents and Lesson learn
Signalling And Communication:
Two way Radios
Conventional Radio
Trunked Radio
Radio Direction for Crane Driver
Bell or Whistle Code
Hand Signal
Rigging Engineering Calculation
Determination on Centre of Gravity
Rectangular Object
Round or Oval Shape
Multiple Load / Object
Rigging Engineering Calculation
Volume Calculation
Rectangular Object
Round or Oval Shape
Triangle Object
Cone Object
Multiple Load/ Object
Ropes & Knots for Rigger (Synthetic & Natural)
Figure of Eight
Reef knot
Single Bowline
End Splice
Eye Splice
Sheet Bend
Timber Hitch
Rolling Hitch
2 and Half Hitch
Tagline Hitch
Clove Hitch
Etc
Rigging Engineering Calculation
Calculation of Mass
Basic Mass Calculation for Various Shapes of Loads Normally Engaged During Crane Operation versus volum
Concrete/ Cement
Steel (Mild/ Hard)
Liquid (Water)
Wood
Sand, etc
** Guidelines for Steel pipe, steel bar, Angle Bar, Mild Steel Plate, Mild steel plate bar, C-Channel, Universal Beams, Universal Columns, etc
Lifting Appliances
Selection on Sling material
Sling wire FSWR 1570
Sling wire FSWR 1770
Chain Sling GT80 / G100
Synthetic Webbing (Flat/Round Slings)
Stacking and Clearances
Clearance
Stacking Steel Plate
Stacking Rolled Steel Coils And Other Round Loads
Stacking Timber
Care, Maintenance, and Inspection on Sling Material
Spreader Bar vs Stabilizer Bar
Use of Slings / Hoists And Tag line
Determination of W.L (SWL versus WLL)
Minimum Breaking Force (MBF) and its usages
Rigging Engineering Calculation
Safety Factor requirements
Lifting Material & Human
Sling wire FSWR 1570
Sling wire FSWR 1770
Chain Sling GT80 / G100
Synthetic Webbing (Flat/Round Slings)
‘choke’ / Hitch Factor
Rectangular Load
Round Load
Sling Angles Factor
Sudut 30o
Sudut 45o
Sudut 60o
Sudut 90o
Sudut 120o
Determination of sling Strength based on diameter & Safety Factor
Sling Wire
Synthetic Sling
Chain Sling
Determination of Sling length and lifting angle
Rigging Engineering Calculation
Inspection of Slings & shackles and attachments
Sling Wire (5%)
Chain Sling (5%)
Synthetic Sling
Note: Determination of acceptance condition of slings and attachments. (Category 1 and Category 2)
Rigging Engineering Calculation
Calculation of Multiple Sling
SWL Sling 1
SWL Sling 2
Multiple Crane Lifting / Multiple @ Large Loads
Tendem Lifting
Crane Selection and Ordering crane
Crane type vs Load Chart & Working Radius
Mobile Crane
Crawler Crane
Role & Responsibility of Lifting Supervisor
Designing Lifting Plan
Special Lifting (Professional Engineer Interferences): Lifting Specialist in General
Practical session on:
Determination of COG
Determination of Volume & Mass
Selection of slings
Lifting Techniques
Hand Signaling & Radio Communication
Inspection of Crane & Lifting Hoist appliances
Manual Lifting & Mechanical Lifting
Gin Wheel Application & Limitations
ASSESSMENT PAPER:
General Knowledge
Assessment Legislation
Assessment Calculation (Lifting Plan)

Jadwal Pelatihan 2025

Batch	Tanggal	Tanggal	Tanggal
Batch 1	2 – 3 Januari	16 – 17 Januari	30 -31 Januari
Batch 2	1 – 2 Februari	15 – 16 Februari	28 - 29 Februari
Batch 3	5 – 6 Maret	14 – 15 Maret	27 - 28 Maret
Batch 4	3 – 4 April	18 – 19 April	29 - 30 April
Batch 5	2 – 3 Mei	15 – 16 Mei	29 – 30 Mei
Batch 6	4 – 5 Juni	13 – 14 Juni	26 – 27 Juni
Batch 7	3 – 4 Juli	17 – 18 Juli	30 – 31 Juli
Batch 8	1 – 2 Agustus	14 – 15 Agustus	28 – 29 Agustus
Batch 9	4 – 5 September	17 – 18 September	26 – 27 September
Batch 10	2 – 3 Oktober	16 – 17 Oktober	28 – 30 Oktober
Batch 11	5 – 6 November	14 – 15 November	27 – 28 November
Batch 12	3 – 4 Desember	11 – 12 Desember	19 – 20 Desember

Jadwal dapat disesuaikan dengan kebutuhan calon peserta.
Silakan hubungi tim marketing kami untuk info lebih lanjut.

Lokasi dan Investasi

Pelaksanaan pelatihan oleh SITI Training dapat dilakukan secara fleksibel, baik offline maupun online, sesuai dengan kebutuhan dan preferensi peserta. Untuk pelatihan offline, kami menyediakan lokasi di berbagai kota besar di Indonesia:

Jakarta

5.500.000 IDR / peserta *

Yogyakarta

5.500.000 IDR / peserta *

Bali

5.500.000 IDR / peserta *

Bandung

5.500.000 IDR / peserta *

* Syarat dan ketentuan berlaku:
Investasi untuk pelatihan disesuaikan dengan jumlah peserta.
Silakan hubungi tim marketing kami untuk info lebih lanjut.

Training Online dan In-House

Bagi peserta yang lebih memilih pelatihan secara online, kami memfasilitasinya melalui aplikasi Zoom, memastikan pengalaman belajar yang interaktif dan efektif. Selain itu, kami juga melayani in-house training, di mana pelatihan dapat diselenggarakan langsung di lokasi perusahaan Anda, memberikan kenyamanan dan kemudahan bagi karyawan untuk meningkatkan keterampilan dan kompetensi mereka tanpa harus meninggalkan tempat kerja.

Catatan : Apabila perusahaan membutuhkan paket in-house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.